TEL:0575-86288836
Language
TQF- 568 Rotor Spinning Machine

TQF- -568 rotor spinning machine is a kind of new-type open end spinning machine with some features such as high speed, high efficiency, automatic exhausting impurities. It can spin directly various short fibers, 40mm cut fibers or 60mm cut viscose into single fine yarn from combed sliver.

This is a double - side -type spinning machine based on modularized design. It applies many new technologies such as air suction spinbox, semi-automatic piecing-in, closed loop control etc. Max. rotor speed can reach 110000rpm.

Thanks to application of numerous new technologies, it holds spinning and winding quality close to full automatic rotor spinning machine, and then shows better price- performance ratio.

Product Introduction

1.jpg

Spinbox
Spinning components
T-ic intelligent convenient piecing-in system
Winding mechanism
Electrical control system on machine body
Yarn guide traverse mechanism
Micro-tension mechanism
Main drive
Electrical cabinet design with patent
Waxing device
Top travelling cleaner
Electronic yarn clearer
More flexible spinning functions
Convenient refueling or automatic refueling device
Joint Spinning-in
Spinbox
Novel structure: change of spinning components without any tools, convenient operation.
Single step-motor drive sliver intake: enable sliver to realize variable speed feeding.
Adjustable exhausting impurities channel: reasonable adjustment according to different material, efficient control of exhausting impurities percentage.
Air suction type spinning rotor: various rotors can be applied, min. rotor diameter is 32mm, max. rotor speed is 110000 rpm.
Spinning components
Permit to select different spinning components according to different technologic requirements. Wider application range and lower operation cost thanks to series and standardization of spinning components.
T-ic intelligent convenient piecing-in system
Semi-automatic operation, intelligent control; automatically finish piecing-in operation of yarn if only close spinbox. Variable speed sliver feeding and reversing, millisecond -level control, perfect piecing quality of yarn. Easy operation, higher stability and piecing-in success rate.
Winding mechanism
Package lift-off device: when the package is full or a yarn break occurs, the package will be lifted immediately and departed from winding roller.
New type tapered winding form: Winding roller for tapered package is divided into left and right part on which the speeds can be automatically adjusted, thus enable tapered package to realize double-support winding.
Novel bobbin cradle structure: This structure can ensure yarn tension uniform inside and outside take-up package; permit to spin yarn continually when doffing and to reserve the tailing formation.
Electrical control system on machine body
Novel electrical control system on machine body:
So easy operation and maintenance, faster communication, stronger anti-interference.
Yarn guide traverse mechanism
Novel electronic yarn guide traverse:
Adopting the advanced servo drive system;
Independent control per side, more convenient operation and maintenance;
More perfect formation of package.
Micro-tension mechanism
Span-new inverter control function;
moderately adjust yarn tension and winding angle;
Easy to operate.
Main drive
reduce vibration of machine;
Constantly increase speed for rotor and combing roller; controllable for piecing time.
Electrical cabinet design with patent
More reasonable layout for electrical components, more convenient operation and maintenance, with a circulation ventilation system for fast cooling inverter and getting longer life of inverter.
Waxing device
Drive the waxing shaft by a friction drive disc, then drive the waxing roll to realize waxing of yarn
Top travelling cleaner
Remarks: Optional
Electronic yarn clearer
A standard terminal is reserved on the control system of machine; various electronic yarn clearers can be installed at any moment.
More flexible spinning functions
Equipped with the function for spinning fancy yarns and two different kinds of yarns can be spin at same time on two sides of the machine, which makes it more flexible so as to have a better use of space.
Convenient refueling or automatic refueling device
The bearings are fully lubricated to improve their life. It is more convenient to refuel and reduce work.
Joint Spinning-in
Once the machine meets the interruption of power supply, the function can make it quickly resume production and reduce labor force.
主要规格参数

 2.png

0575-86288859

Zhejiang Taitan Co. Ltd
99 Taitan Road, Xinchang County, Zhejiang Province, 312500, China
Email
taitan@chinataitan.com

浙公网安备 33062402000018号

Mobile version| Login | 浙ICP备06045250号-1 | Zhejiang Taitan Co. Ltd| Address:99 Taitan Road, Xinchang County, Zhejiang Province, 312500, China | Email:taitan@chinataitan.com